Watch straps for Panerai Radiomir Chrono PAM00163
The Radiomir Chrono PAM00163 puts a black dial with two grey counters inside a 44 mm cushion-shaped case in polished AISI 316L steel. The minute counter sits at three, small seconds at nine and the date at about four-thirty, with a tachymeter scale around the flange. Panerai specifies a hand-wound Valjoux 234 movement, 50 hours of power reserve and a see-through sapphire back. Slender removable wire-loop attachments connect the strap to the case. Their construction, together with the winding crown and two separate chronograph pushers, makes the attachment and the material's first bend central to any replacement plan.
- Reference
- PAM00163
Balance the polished cushion case and the two grey counters
The archive photograph pairs the watch with a burgundy strap showing rectangular grain. Its colour offers a warm contrast to the black dial and polished steel, but the photograph does not establish the strap's leather species. A burgundy sample with restrained stitching can retain that relationship; a plain black sample makes the grey counters and pale twelve and six more prominent. Compare the grain scale beside the round counters before choosing a strong pattern. Also examine the leather's edge beside the slender wire loops: a visually heavy edge can change the impression of the open space between strap and case.
Colour, construction and fit
Assess the removable wire loops as their own assembly
Panerai describes this reference's wire-loop strap attachments as removable. Examine the actual loop assembly, the way it is secured, its opening and the clearance available for material. Those details need their own assessment; a generic conventional-lug or spring-bar arrangement cannot be assumed. Neither the case opening nor a nominal replacement strap width is established by the cited technical specification. Keep both unknown until the actual watch and intended attachment have been checked, and evaluate the proposed end construction and thickness together.
Leave access to the winding crown and both chronograph pushers
The hand-wound movement gives the right-side crown a regular role, while the separate upper and lower pushers operate the chronograph. Check a proposed material profile and its first bend against those three controls on the actual watch. The source provides a 44 mm diameter but no case-thickness figure, so the diameter cannot settle the amount of padding or clearance. View a sample from the side and check whether its edge or bend would crowd the case or impede access to a control. The polished cushion outline and slender loops should remain distinct when assessing the proportions.
Keep the 20 mm buckle specification at the closure end
The archive lists a 20 mm polished-steel Radiomir buckle. That value belongs to the buckle and does not specify the opening at the watch, an original strap taper or a replacement watch-end width. Before considering reuse, inspect the actual buckle's fastening, pin and hole or slot arrangement, accepted material thickness and required strap lengths. A proposed closure with a similar polished finish still needs its own construction check. The 20 mm label alone does not approve a strap or the wire-loop attachment.
Questions about this reference
Does the listed 20 mm buckle mean that PAM00163 takes a 20 mm strap at the watch?
No. Panerai assigns 20 mm to the polished-steel Radiomir buckle. The cited source does not establish a case opening or watch-end strap width, so those measurements remain unknown here. Assess the actual removable loops and closure separately before specifying a replacement.
Can measurements or attachment advice from the Radiomir PAM00249 be carried over?
The PAM00249 comparator has a 47 mm case and an hours-and-minutes display, while this PAM00163 is a 44 mm chronograph with date, a winding crown and two pushers. Sharing a wire-loop family does not establish an identical opening, end construction or buckle arrangement. Use the actual PAM00163 assembly and preserve access to its three controls when evaluating a strap.
Official Panerai Radiomir Chrono PAM00163 archive specifications