Representative Oris Big Crown ProPilot 01 751 7697 4063-07 8 20 19 steel watch head, grey Arabic dial, enlarged date at three and turbine-style bezel.
Representative Big Crown ProPilot 01 751 7697 4063-07 8 20 19, without its bracelet. Its dimensions and dial configuration are example-specific.

Watch straps for Oris Big Crown ProPilot

A Big Crown ProPilot strap choice starts with the exact Oris reference. The example here is 01 751 7697 4063-07 8 20 19: a 41 mm steel watch with a grey dial, white Arabic numerals, enlarged date and a steel bracelet. Its turbine-style bezel and prominent crown are useful points when comparing material and end profiles.

Identify the exact reference before choosing a strap

Check the reference and current bracelet attachment before choosing a replacement. Consider head support, the first bend and access beside the crown. Then assess both strap-half lengths and the intended closure using the wearer's wrist, rather than carrying over a bracelet length.

Colour, construction and fit

Use the named dial as a styling example

Grey or black can continue the example's dial palette; brown adds a warmer contrast to the steel. A calm grain leaves the large Arabic numerals prominent. Compare the actual watch and samples in daylight, since another dial finish can change that balance.

Keep each dimension in its source role

Oris labels the example's case size as 41 mm and its Interhorn Width as 20 mm. These describe different measurements. The 32.20 mm calibre diameter is a movement dimension, not a case or strap-end width. No single numeric width is assigned to the family by this guide.

Plan the ends, lengths and closure together

The factory steel bracelet and its closure form one arrangement. For a separate strap, assess end shape, material thickness, taper, closure interface and length together. A manufacturer list of fitting straps does not itself approve a Da Luca attachment or hardware transfer.

Questions about this model family

Does one strap width apply to every Big Crown ProPilot?

Do not select solely from the family name. The exact example has a published 20 mm interhorn width, but opening width alone does not verify end shape, clearance, retention or fit. Confirm the reference and actual construction first.

Which reference is the representative example?

The representative is 01 751 7697 4063-07 8 20 19, with a grey Arabic dial, enlarged date at three, steel turbine-style bezel and large crown. Any reused artwork represents this watch head, with the bracelet omitted.

Keep the Altimeter separate from the Big Date

The bracelet-equipped Big Crown ProPilot Altimeter 01 733 7705 4164-Set 8 23 19 is the metre-scale configuration. Oris lists a 47 mm case and a 23 mm Interhorn Width, and its manufacturer photograph shows two crowns. The 41 mm, 20 mm Big Date example on this page therefore cannot supply its case-end specification. Identify the Altimeter’s actual end assembly and access around both crowns before specifying a replacement; the fitted photograph does not measure that clearance.

Official manufacturer specifications for the named example