Jaeger-LeCoultre Reverso Tribute Monoface Q7168420 rectangular steel watch head with a silver-grey opaline dial, applied faceted indices, two dauphine hands and horizontal case grooves; no strap or buckle.

Watch straps for Jaeger-LeCoultre Reverso Tribute Monoface Q7168420

The Jaeger-LeCoultre Reverso Tribute Monoface Q7168420 is a compact, manually wound two-hand watch with a silver-grey opaline dial. Its rectangular steel case and parallel grooves above and below the dial make the strap's edges part of the overall composition. The manufacturer's 40.1 × 24.4 mm dimensions mean lug-to-lug length and case width, not a round-case diameter. That distinction is the starting point for a proportionate replacement.

Reference
Q7168420
Manufacturer lug gap
18 mm

Let the rectangular lines lead the texture choice

The original light-brown calfskin brings warmth to the cool steel and silvered dial, with smooth and grained areas creating a deliberate texture contrast. A quieter grain can leave the faceted indices and dauphine hands prominent; dark brown or charcoal can make the pale face feel more sharply framed. Compare stitching parallel to the railway minute track. A bright or heavy seam introduces another border around an already strongly outlined rectangular watch.

Colour, construction and fit

Use length, width and height in their proper roles

The 40.1 mm measurement runs from lug to lug, while 24.4 mm describes the case width. Jaeger-LeCoultre separately gives a 7.56 mm case thickness. Consider those three proportions when judging leather thickness, the bend near the carrier and the placement of the closure. A round watch with a similar numerical size does not provide a useful shortcut, and none of these case measurements specifies a replacement strap length.

Separate the 18 mm opening from the 16 mm buckle

The exact product page labels an 18 mm lug width and a 16 mm original steel double-folding buckle. Keep the watch-end and buckle-end figures separate. The 18 mm opening alone does not verify a generic strap or its connection parts. If retaining the folding buckle, check the fixing arrangement, leather thickness and folding geometry together; a matching width by itself is not a complete hardware compatibility check.

Treat the supplied lengths as a starting arrangement

The factory strap is listed with a 70 mm strand at twelve and a 110 mm strand at six. These describe the supplied two-piece layout, not a universal wrist-size recommendation. Assess usable length and buckle position for the particular wrist. The original calfskin uses the manufacturer's quick-release system, but that label does not establish that another quick-release strap, spring bar or closure will work with this reference.

Questions about this reference

Is 24.4 mm the strap width?

It is the rectangular case width. The exact product separately identifies an 18 mm lug opening and a 16 mm buckle. Using the case width at either strap end would confuse different measurements and overlook the actual connection.

Should the illustration show a seconds counter or date?

Q7168420 displays hours and minutes only. Its opaline dial, applied indices and two dauphine hands should remain uncluttered. Other Reverso complications or dial arrangements are not substitutes for this exact Monoface head.

Official Jaeger-LeCoultre specifications for Reverso Tribute Monoface Q7168420