Watch straps for Jaeger-LeCoultre Reverso Tribute Chronograph Q389848J
The blue front of the Reverso Tribute Chronograph Q389848J shows hours and minutes, while its reverse reveals the chronograph mechanism and a 30-minute counter. The steel carrier, crown and two rectangular pushers give this watch a different fitting brief from a smaller, simpler Reverso. Keep the entire reversing case and both control positions in view when considering replacement strap ends.
- Reference
- 389848J
Choose one texture for two faces
An understated navy can connect the blue front with the blue details on the open reverse. Charcoal is a quieter frame for the visible mechanism, while a fine brown grain introduces warmth. Judge a sample with both faces exposed: heavy stitching can compete with the front’s railway track and the reverse’s technical detail.
Colour, construction and fit
Allow for the long carrier and the reversal
Jaeger-LeCoultre gives 49.4 mm lug-to-lug length and 29.9 mm case width, with an 11.14 mm case thickness. These are case measurements, not strap widths. Assess how promptly each shoulder bends and whether the proposed ends leave room for the watch’s normal slide-and-turn movement. Do not force the reversing case against a bulky end.
Preserve access to crown and pushers
Two rectangular chronograph pushers sit above and below the crown. Evaluate the complete watch and proposed material together so the shoulders do not crowd the controls during wear or case reversal. The source photographs do not reveal all retaining-bar dimensions or the available thickness behind the strap end.
Keep the 22 mm opening and 20 mm closure distinct
The exact table labels 22 mm at the lugs, a 20 mm steel double-folding buckle and 75/120 mm original strands. Reusing that buckle requires its own mounting and thickness assessment. Factory quick-release is not proof that another quick-release bar or a standard strap end can reproduce the original connection.
Questions about this reference
Can the smaller Duoface’s fitting numbers be used?
No. Q389848J has its own longer carrier and 22 mm lug-width label. A family name, similar gadroons or a second face cannot establish the same end geometry and usable length.
Should the blue-front illustration show chronograph counters?
No. The source front is a two-hand blue dial. Chronograph seconds and the 30-minute counter belong to the open reverse. Keep those two views separate when confirming the exact watch configuration.
The pink-gold Q389256J has a 22 mm lug-width specification and a 20 mm pink-gold pin buckle. Its fastening needs a separate assessment from Q389848J’s steel double folding buckle, even though both closures are labelled 20 mm. Matching those widths does not establish interchangeable strap construction or hardware.