Jaeger-LeCoultre Q3988482 bare steel Reverso head with blue front dial, silver-coloured markers, railway minute track and small seconds.
The complete steel carrier and crown remain around the blue front. The blue strap is omitted.

Watch straps for Jaeger-LeCoultre Reverso Tribute Duoface Small Seconds Q3988482

The blue front of Q3988482 has small seconds; its silver-grey reverse carries a second time zone and a 24-hour display. This steel Reverso Tribute Duoface has a 47 × 28.3 mm case and a manufacturer-listed 20 mm lug width. A strap enquiry should account for the complete carrier, the case that reverses within it and the setting access at the top, rather than reuse the smaller 19 mm Duoface’s dimensions.

Reference
Q3988482

Choose a texture that works with both faces

Navy can continue the blue front while remaining quiet against the textured silver-grey reverse. Charcoal softens the contrast, and a subdued brown introduces warmth to the polished steel. Compare samples with the watch turned to each side. Fine grain and restrained stitching leave room for the front’s railway track and the reverse’s patterned border.

Colour, construction and fit

Read 47 mm as the case’s lug-to-lug length

Jaeger-LeCoultre explicitly labels 47 mm as lug-to-lug length and 28.3 mm as case width; the complete case is 10.3 mm thick. These measurements describe the carrier’s footprint and profile, not the strap-end width. Check how promptly the proposed leather bends below each end and whether it allows normal movement of the reversing case without force.

Allow access with the case outside its cradle

The manual linked from this product page describes a setting catch on the top end of the case, reached with the case turned over and left out of its cradle. Ask the fitter to assess that access with the proposed shoulders in place. The front photograph does not establish the hidden clearance. Follow the watch’s correct operating instructions; do not treat the catch as a chronograph pusher.

Specify the folding closure as well as the watch end

The exact table lists a 20 mm lug width, an 18 mm steel double-folding buckle and original strands of 75 mm at twelve and 120 mm at six. Matching these widths is not a complete construction specification. Confirm buckle mounting, leather thickness and effective length on the wrist. The original blue calfskin’s quick-release system does not approve unrelated bars or strap ends.

Questions about this reference

Can the 19 mm small Duoface’s strap specification be used?

No. Q3988482 has its own 47 × 28.3 mm carrier and 20 mm lug-width label. A shared Duoface name or similar horizontal grooves does not establish identical retaining parts, end geometry or useful strap length.

Is the pink-gold Q3982590 an interchangeable fitting template?

No. Its manufacturer table describes a different case thickness and a pin buckle. Keep Q3988482’s steel double-folding arrangement distinct and assess the actual watch before choosing or reusing hardware. No Da Luca fit is established by a similar-looking head.

Official Jaeger-LeCoultre Q3988482 specifications