Jaeger-LeCoultre Polaris Date Q9128981 steel watch head with a blue dial, date at three, internal timing ring and two crowns.
The Q9128981 is the 40 mm Polaris Date; its factory canvas is omitted from the head illustration.

Straps for Jaeger-LeCoultre Polaris Date Q9128981

The Polaris Date Q9128981 is the 40 mm steel model with a 12.9 mm case, blue dial, date at three and two crowns. Its factory canvas dimensions belong to this reference. They should not be replaced with figures from the larger 42 mm Polaris Date when planning end width, taper or length.

Reference
Q9128981

Give the smaller Date a measured first bend

A navy textile texture echoes the factory canvas, while a quiet charcoal sample changes the emphasis without competing with the blue dial. Compare edge thickness against the 40 mm case and leave enough flexibility for the strap to settle naturally around the wrist.

Colour, construction and fit

Keep both crowns usable

The internal timing ring and time-setting controls give this Date its two-crown layout. Assess end thickness and the first bend with both crowns accessible. The 12.9 mm case profile is a useful proportion reference, not an attachment-clearance measurement.

Keep factory dimensions in their proper roles

The canvas Strap section lists a 20 mm lug-width figure, 75 mm and 120 mm halves, and a separate 18 mm folding buckle. These describe the factory arrangement; the 20 mm entry is not a measured gap on your watch or approval for aftermarket ends.

Choose lengths for your own closure

Use 75/120 mm as an original-equipment comparison, not a universal wrist-size recommendation. Record your wrist, desired closure position and proposed buckle or clasp. Confirm retention and end geometry independently, including any plan to reuse factory components.

Questions about this reference

Does the factory 20 mm entry guarantee a 20 mm replacement?

No. It appears in the factory canvas specifications. Confirm the actual case opening, end shape, thickness and retaining arrangement before choosing or installing a replacement.

Can I copy the strap specification from a 42 mm Polaris Date?

Do not assume so. Q9128981 has its own 40 mm case and 20/18 mm, 75/120 mm factory arrangement. Those figures do not establish shared hardware or interchangeable ends.

Official Q9128981 specifications