Watch straps for Jaeger-LeCoultre Duomètre Quantième Lunaire Q604848J
The Duomètre Quantième Lunaire Q604848J combines a blue opaline dial with a 42.5 mm steel case. A date ring and moon display occupy the left register, time appears on the right, and jumping seconds sits below; twin power-reserve indications complete the composition. Jaeger-LeCoultre identifies it as Quantième Lunaire, despite the different wording in the page’s URL. The case is 13.05 mm thick. Manual calibre 381 has a stated 50-hour reserve, and the factory configuration uses blue alligator with a steel double-folding buckle.
- Reference
- Q604848J
Let the blue dial carry the detail
Deep navy continues the source palette while charcoal draws a quieter boundary around the blue. A muted grey can make the steel feel lighter; a subdued brown introduces contrast without repeating the dial. Judge texture and gloss alongside the date ring, moon and open lower sections. A large grain or bright seam may compete with the many fine scales. Compare small samples before committing to the surface treatment.
Colour, construction and fit
Use the Quantième Lunaire’s own profile
The 13.05 mm case and left-side control belong to this exact date/moon reference. Consider how padding and the first bend would support the case while keeping the crown and control accessible. Assess thickness and clearance at the actual watch ends. The round diameter alone cannot establish attachment geometry, and the thicker pink-gold Chronograph Moon is not a substitute specification.
Separate OEM strap figures from a measured case gap
The manufacturer’s factory Strap section lists 21 mm, with 75 mm for the half at twelve and 120 mm at six. It separately gives an 18 mm steel double-folding buckle. These describe the supplied strap, lengths and closure. The 21 mm figure is not an independently verified lug gap or a fit approval for an aftermarket strap. Confirm retaining hardware and end construction on the real watch.
Plan the folding buckle before setting both lengths
A folding closure can change where each half and the remaining tail sit beneath the wrist. If considering the original buckle, assess its geometry, inside width, required thickness and strap-end treatment; do not assume transfer from the 18 mm label alone. Compare a comfortable existing arrangement and record the desired adjustment range. The factory 75/120 mm pairing is a reference, not a prescription for every wearer.
Questions about this reference
Is Q604848J a chronograph?
No. The actual manufacturer title, specifications and front identify the Quantième Lunaire with calibre 381, date, moon phases, jumping seconds and twin power reserve. It should not inherit chronograph wording or control instructions from Q622252J.
Does the factory quick-release system prove generic compatibility?
No. It describes Jaeger-LeCoultre’s supplied system. A proposed replacement needs its own assessment of the watch end, hardware, thickness, closure and secure installation; a nominal factory strap width does not settle those questions.