Hamilton Khaki Field Auto Chrono H71706830 head with black no-date dial, counters at twelve and six, small seconds at nine, matte steel case and right-side crown and pushers.
The H71706830 head retains its chronograph displays, warm luminous details and red central-hand tip. Both the olive leather strap and its separate under-case bund pad are omitted.

Watch straps for Hamilton Khaki Field Auto Chrono H71706830

The Hamilton Khaki Field Auto Chrono H71706830 pairs a 44 mm sandblasted steel case with an olive calf-leather bund strap. The broad leather pad visible beneath the watch is separate from the metal case. Its black no-date dial has counters at twelve and six, a sparse small-seconds display at nine and a red tip on the central chronograph hand. The automatic H-21 and right-side crown and pushers belong to this exact configuration. A replacement brief starts with a decision about the pad as well as the strap.

Reference
H71706830

Decide how much of the olive frame to retain

The original olive surface has a soft, low-sheen appearance that works with the matte steel and warm luminous details. A similarly muted olive sample could preserve that relationship; charcoal would give the pale numerals a quieter border. Brown leather for dry wear could add warmth without repeating the red hand tip. Compare colour and texture with the full pad in view, then again with the proposed outline if the pad is to be omitted. Those two presentations need not use the same visual weight.

Colour, construction and fit

Treat the bund pad as a separate construction choice

Manufacturer gallery views show the broad under-case pad and the narrower strap sections held across it by leather loops. Discuss whether to retain the original pad, design a separately assessed pad, or move to a two-piece arrangement without one. Each changes the surface beneath the case and the outline around the lugs. The factory arrangement does not prove that a new strap will pass through its loops or attach correctly to the watch.

Keep the two 22 mm specifications in their own roles

Hamilton lists 22 mm lug width and 22 mm width for the original H-Buckle. One describes the watch end and the other the original closure; identical numbers do not establish interchangeable parts. Verify the actual retaining hardware, strap-end thickness and case clearance. If the buckle is to be reused, assess its fastening, the replacement’s thickness and any proposed taper independently.

Include the pad when considering height and control access

The published case thickness is 14.15 mm, but it does not measure the complete arrangement with leather beneath the watch. Compare the pad, the first bend of each strap section and where the closure rests on the intended wrist. Keep the right-side chronograph pushers and screw-down crown accessible, without an oversized pad edge or bulky keeper obstructing them. Choose lengths from the proposed complete arrangement rather than the 44 mm diameter alone.

Questions about this reference

Is the wide olive backing part of the watch case?

No. The source galleries show a distinct leather pad beneath the steel head. Changing or omitting it changes the strap brief, but the remaining attachment and clearance must still be assessed on the actual H71706830.

Can I use the ordinary Khaki Field Auto’s strap dimensions?

Use the exact reference. H71706830 is a 44 mm automatic chronograph with a nominal 22 mm lug width and a bund arrangement. The current H70455133 guide concerns a 38 mm three-hand Field Auto with 20 mm lugs and a steel bracelet. Its dimensions and original hardware do not transfer to this chronograph.

Official Hamilton H71706830 specifications