Watch straps for DOXA SUB 300T Professional 840.10.351.10
The orange Professional dial gives the DOXA SUB 300T a strong identity before a strap is added. Reference 840.10.351.10 is the steel-bracelet configuration. For a replacement, DOXA documents a 20mm lug width. Use that as the starting measurement, then consider how the strap will sit beside the broad steel case and support the watch on your wrist.
- Reference
- 840.10.351.10
- Manufacturer lug width
- 20.00 mm
Start with the 20mm opening, then check clearance
DOXA lists the case at 42.5mm across and 13.65mm high; neither number is the strap width. The specified 20mm opening is only one part of the attachment. End thickness, spring-bar dimensions and the space between the case and strap still matter. A strap should be able to move naturally at the lugs without being crushed against the case. Keep the full reference available when discussing those details.
Choosing the right character and construction
Let the orange dial lead
Black makes a deliberate contrast and keeps the combination close to the watch's functional character. Charcoal or muted olive can make it feel less stark. A subdued brown leather offers a different direction for dry, casual wear. Start with tonal stitching: the dial already supplies a strong colour accent. If choosing orange stitching, compare the actual thread with the dial rather than expecting two screen images to match.
Balance support against added height
A substantial-looking case does not automatically need the thickest strap. Look for an end profile that supports the watch while bending comfortably around your wrist. Heavy padding can raise the watch further and make the transition feel rigid. A pass-through construction also adds material beneath the case; check that extra thickness and the route around the spring bars before deciding it is the more comfortable option.
Separate a new buckle from the original clasp
DOXA offers model-specific bracelet and rubber arrangements with a ratcheting extension. That does not establish that the original clasp will accept an unrelated replacement strap. If retaining it, verify the fastening method, end dimensions and thickness with the actual hardware. A conventional two-piece strap with its own buckle is a different assembly. The 20mm watch end does not specify the width at either buckle or clasp.
Choose for the day you will actually have
For dry everyday wear, leather can soften the visual weight of the steel and orange. For regular water exposure, assess the chosen material and hardware for that use rather than relying on the watch's depth rating. Measure a comfortable strap's two halves and note your wrist circumference before ordering. Check buckle position, keeper placement and how much tail remains; a secure fit should not depend on overtightening.
Questions about this reference
Is the required watch-end width 20mm or 22mm?
DOXA specifies 20mm for this SUB 300T reference. Do not force a wider strap into the opening, and do not borrow measurements from a different SUB model.
Does any 20mm strap fit the SUB 300T?
Matching width does not confirm end clearance, bar seating or attachment security. Those need to be checked for the specific strap and hardware before wear.
Can a strap guide for the SUB 300 be used unchanged?
Treat the model and reference separately. A shared colour name or similar silhouette does not establish identical case geometry, attachment requirements or hardware.