Coloured ink illustration of the Breitling Superocean Heritage 36 A10390361L1S1 head, with a pale green dial and bezel, date at six and bare steel lugs.

Watch straps for Breitling Superocean Heritage 36 A10390361L1S1

The A10390361L1S1 brings a light green dial and matching bezel to the compact Superocean Heritage Automatic 36. Its pale colour, silver hands and fine dark minute track create a different starting point from the larger blue or black Heritage models. A strap can either soften that green or give it a stronger outline.

Reference
A10390361L1S1
Manufacturer lug gap
18 mm
Factory strap width
18 mm

Keep the three width figures separate

Breitling’s current technical table lists a 36 mm steel case, 10.42 mm thickness and an 18 mm gap between the lugs. The original green rubber strap is described as straight, with an 18/16 mm taper and a 16 mm folding clasp.

These figures answer different questions: 18 mm describes the case opening, 18/16 describes the factory strap’s two ends, and 16 mm identifies the original clasp size. They do not establish the end profile, thickness or hardware needed for a replacement. Confirm those details on the actual A10390361L1S1 before choosing a construction.

Colour, construction and fit

Use the pale green as the colour reference

The dial and ceramic bezel are a light mint or apple green, rather than the deep forest shade seen on other watches. Charcoal leather creates a clear border; warm tan makes the palette softer; a darker green can repeat the colour without pretending to be an exact match.

Compare material samples beside the complete head in daylight. The dial’s reflective finish can look lighter or darker as it moves. Tonal stitching keeps the slim silver markers and arrow-shaped hour hand prominent, while a strong contrasting seam becomes an additional design feature.

Choose a profile that suits the smaller case

On this 36 mm watch, heavy padding can look quite different from the original mesh-textured rubber. Consider a restrained profile and flexible ends, then check whether the proposed material can move freely near the case. A visually neat fit must still leave appropriate clearance.

The published 18 mm opening should remain an exact starting measurement. Do not substitute figures from a 42 mm Heritage or assume that a wider strap can be compressed safely. The illustration shows the watch’s identity, not hidden attachment dimensions.

Plan the closure before the final length

If you want to retain the original folding clasp, have its fastening arrangement, required thickness and strap-end shape checked separately. The listed 16 mm size alone does not prove that an aftermarket leather end will work with it.

Choose the closure, record wrist circumference and compare the lengths of a strap you already find comfortable. Keep the original rubber and clasp together when removed. A leather option should be selected and cared for according to its own material requirements, including the intended exposure to moisture.

For the Oceania Edition A103901A1A1A1, Breitling lists a steel mesh bracelet with an 18/16 mm equipment label. The exact technical record does not separately specify its clasp size or material. Keep that bracelet assembly distinct from the A10390361L1S1 rubber-and-clasp configuration discussed here: the shared taper label does not establish the construction of a replacement or approval to transfer the original closure.

Questions about this reference

Does the 18/16 mm factory taper specify a replacement strap?

It describes the original rubber strap. A replacement still needs its case-end shape, thickness, hardware, closure and useful lengths assessed. This guide does not certify a Da Luca installation.

Should the leather match the pale green exactly?

An exact colour match is a style choice, not a fit requirement. Charcoal, tan or a deliberately darker green can work visually; judge the sample beside both the dial and bezel.

View Breitling’s specifications for A10390361L1S1