Blancpain Villeret Ultraplate 6605 1127 55B watch head with steel case, white dial, silver Roman numerals, two leaf-shaped hands and crown.

Watch straps for Blancpain Villeret 6605 1127 55B

The steel Villeret Ultraplate 6605 1127 55B has a white dial with Roman numerals and two leaf-shaped hands. Blancpain specifies a 39.70 mm diameter, 7.45 mm case thickness and 22.00 mm width between horns. Calibre 11A4B is hand-wound; its power-reserve indication is on the bridge side, as the linked 6605 manual explains. This combination makes the side profile, crown access and view through the sapphire back useful parts of the strap enquiry.

Reference
6605 1127 55B

Judge the edge beside the thin case

Black follows the supplied alligator strap and gives the white dial a clear border. Charcoal softens the contrast, while a muted brown adds warmth to the steel. On this quiet two-hand face, grain, stitching and the height of a rolled edge are especially visible. Compare a relatively flat sample with a padded one from the side. The 7.45 mm case dimension is a reference for proportion, not a prescribed strap thickness or proof that the thinnest construction will fit.

Colour, construction and fit

Include winding access in the end assessment

Hand-winding makes access to the crown a practical consideration beyond appearance. Ask the fitter to assess the proposed end, its first bend and the room around the crown on the actual watch. A front photograph cannot establish how the material behaves when held or worn. Neither the 22 mm opening nor the case height supplies the retaining-hardware specification, permissible thickness or clearance for a particular replacement.

Keep the rear power-reserve display in the plan

The dial's two hands do not mean the watch lacks a power-reserve indicator: the manual places it on the bridge side, and the exact product page specifies a sapphire back. A construction passing beneath the case could cover that view. If considering such a route, discuss visibility and access along with the attachment assessment. This observation does not establish that a pass-through strap can be installed or that the original two-piece arrangement is interchangeable with one.

Specify a complete closure arrangement

The factory configuration uses alligator leather with a folding clasp. The linked manual limits its described three-blade clasp to specially designed Blancpain straps. Do not convert the 22.00 mm case opening into an assumed clasp width or a recipe for reusing that closure. For an alternative, have the strap and fastening assessed as a complete arrangement, including two useful lengths, taper, closure position and end construction. Keep the original equipment together if it is removed.

Questions about this reference

Where is the power-reserve indicator on this two-hand watch?

The 6605 manual places it on the bridge side. The clean front therefore differs from a Villeret with a reserve scale on the dial. Keep that rear display in mind if a proposed material would run beneath the sapphire back.

Can the 7.45 mm case height decide the strap thickness?

It helps compare proportions, but it is not a measurement of the available space at the ends. Hardware, shape, articulation and closure requirements need checking on this exact reference. No particular Da Luca construction or attachment is certified here.

Official Blancpain 6605 1127 55B specifications and linked manual