Blancpain Fifty Fathoms Automatique 5010 1130 71S steel watch head with black sunburst dial, luminous Arabic numerals and triangular markers, red seconds-hand tip and angled date; no bracelet or strap.

Watch straps for Blancpain Fifty Fathoms 5010 1130 71S

The Blancpain Fifty Fathoms Automatique 5010 1130 71S brings a black sunburst dial and broad rotating bezel to a steel case measuring 42.30 mm. Its large luminous numerals, triangular markers and small red seconds-hand accent give the head a different rhythm from a simpler Bathyscaphe. This guide starts with the selected steel-bracelet configuration and its exact dimensions, including the manufacturer's 21.50 mm opening between the horns.

Reference
5010 1130 71S
Manufacturer lug gap
21.50 mm

Let the black dial and luminous shapes set the contrast

Black leather can continue the dark bezel and dial, while charcoal creates a softer border beside the steel. Muted brown adds warmth without repeating the seconds hand's red tip. A restrained seam leaves the broad luminous shapes as the main light elements. Compare glossy and matte samples against the real watch: the sunburst dial and rounded bezel reflections can make the same black material look flatter or brighter than expected.

Colour, construction and fit

Keep the half millimetre in the specification

Blancpain states 21.50 mm between the horns. Preserve that figure rather than rounding it to 21 or 22 mm when discussing a replacement. It describes a case opening, not an approved nominal strap size or complete connection. Check the fastening parts, end shape, thickness and freedom of movement on the actual watch. A retailer's whole-millimetre label cannot resolve those details by itself.

Match the profile of this steel case

The manufacturer separately lists 42.30 mm diameter and 14.30 mm case thickness. These proportions deserve their own assessment instead of inheriting assumptions from a larger Fifty Fathoms or another case material. Look at how quickly the strap can bend away from the head and how its padding sits against the case side. A substantial-looking strap can echo the bezel, but extra bulk near the ends may change comfort and requires an actual clearance check.

Make a closure plan for leaving the bracelet

The 71S configuration is supplied with a steel bracelet and folding clasp. That equipment identifies the starting arrangement; it does not prove that the clasp accepts an unrelated leather strap. Decide whether a replacement will use its own closure, then consider length, taper and buckle-end thickness together. Other factory strap choices around the same head should not be treated as evidence that every connector or clasp can transfer.

Questions about this reference

Can this guide use a 45 mm Fifty Fathoms sizing recommendation?

The exact source for 5010 1130 71S identifies a 42.30 mm steel case and 21.50 mm opening. A family resemblance does not justify substituting another model's dimensions. Confirm this reference and its actual connection when specifying any replacement.

Should the strap repeat the red seconds-hand detail?

The small red tip remains visible beside a plain black, grey or brown strap. Repeating it in stitching adds a second accent. Compare the thread's brightness and the seam's scale before deciding; the luminous numerals and triangular markers already provide strong visual contrast.

Official Blancpain specifications for Fifty Fathoms Automatique 5010 1130 71S