Watch straps for Blancpain Fifty Fathoms 5007 1130 B52A
The compact Fifty Fathoms 5007 1130 B52A pairs a black dial with a steel case. A leather strap can soften its diving-watch character for everyday wear. Start with the exact watch-end measurement: Blancpain specifies 19mm between the horns for this reference.
- Reference
- 5007 1130 B52A
- Lug width
- 19.00 mm
Begin with the 19mm watch end
The manufacturer lists a 38.2mm case diameter, 12mm case thickness and 19mm spacing between the horns. These describe different parts of the watch. Use the 19mm figure when discussing strap width; do not substitute a measurement from a larger Fifty Fathoms or a Bathyscaphe. Matching that width does not, by itself, establish a complete fit.
Choosing your strap
Give the case room to move
The finished strap end, the fitted attachment hardware and space beneath the case need to work together. Ask for the actual thickness of the strap at the watch end, including any padding. A softly tapering profile may look balanced beside this smaller case, but its clearance still needs to be checked. Never compress an oversized strap between the lugs to make it fit.
Let the black dial set the tone
Black leather with tonal stitching creates a quiet, continuous look. A dark brown or muted grey can make the watch feel more relaxed. Choose a restrained thread colour if you want the large luminous numerals and glossy diving bezel to remain the focus. These are styling choices; they do not change the required attachment measurements.
Choose length and hardware separately
Measure both halves of a strap you already find comfortable and note your wrist size. Then check where the buckle and keepers will sit. The 19mm watch end does not determine the buckle-end width. If you want to reuse Blancpain hardware, have the buckle, pin, holes and strap-end thickness checked as a complete arrangement before ordering.
Keep leather for dry wear
Blancpain supplies this reference with a sail-canvas strap and lists a 30-bar water-resistance rating for the watch. Neither fact gives a replacement leather strap a swimming rating. Keep leather away from repeated soaking, let it dry naturally after incidental moisture, and inspect the areas around the attachment points and buckle regularly.
Questions about this reference
Can I use a 20mm strap instead of 19mm?
The documented spacing for 5007 1130 B52A is 19mm. Do not round it up to 20mm or force a wider strap into the opening. Specify the correct width, then check the remaining attachment details.
Will every 19mm strap fit this watch?
Width is one requirement. The dimensions of the fitted attachment hardware, finished end thickness, case clearance and secure seating also need to be checked. This guide records the manufacturer’s nominal dimension; it does not certify a particular aftermarket strap.
Can the original buckle move onto a new strap?
Blancpain lists a pin buckle for 5007 1130 B52A and a folding clasp for the separate 5007 1130 B52B. Before reusing the buckle on your watch, check the buckle-end width, pin and strap thickness against the actual hardware.